How to maintain aluminum cutting machine?

【China Aluminum Network】

How to maintain aluminum cutting machine?

Jiaqiang Aluminum Co., Ltd.: How to maintain aluminum cutting machine?

1, daily inspection of aluminum cutting machine oil cup with or without oil, our company uses 20# air pressure oil, should maintain seven full, to avoid air pressure parts without lubrication and reduce the service life, check whether the pressure is maintained 6 -7kg pressure can be used to operate, if the pressure is too high or too small, the air pressure parts will be easily damaged. The water filter of this machine has the function of automatic numbering water. If it cannot be drained automatically, please replace the water filter device and avoid the pipeline product. Water, affecting machine work

2. When the power supply is not in use, keep the fuse switch closed to ensure the safety of the machine and personnel.

3. At the refueling and lubrication point, the supporting points of the supporting rod and the press frame ring, the front and rear axles of the connecting rod frame, the cylinder joints, and the fittings of the two rollers in and out of the material need to be checked once a week, timely lubrication and avoiding jamming. Loss of downtime

4. Cutting oil: The fuel injection group can spray CPC-R32 or saponification oil, the air volume can be adjusted and the left and right oil amount can be controlled separately. The use of aluminum alloy cutting oil or water-soluble cutting oil (saponified oil) 1:20, the proportion can not be too thin , To avoid rust or stuck water due to heavy, need to check daily whether the amount of oil is enough, need to add when insufficient, adequate cooling can increase the life of the tool, reduce the aluminum cut flash.

5, keep the table clean to ensure the accuracy of sawing

6. Check whether the air duct is damaged daily. If it is damaged, replace it with a new air duct to prevent the machine from working due to water leakage.

7. The oil tank uses CPC-R68 hydraulic oil, which needs to maintain seven full minutes to ensure that the cylinder moves smoothly. When refueling, first remove the gas source off the back cover, open the oil cover above the oil drum, and add the oil to seven. After the full time, close the oil cover and just cover the back cover.

8. Regularly (better once a week) check whether the belt is excessively worn, whether it is parallel, if the belt surface pressure is too loose or too tight.

9. If there is any malfunction or inoperative condition of the pneumatic parts during operation, replace the defective pneumatic parts.

10. The fuel injection cooling system of the machine uses an injector, which uses the siphon principle to suck the cooling oil to the nozzle and cool the saw blade, so as to avoid the failure of the air pressure parts and the obstruction of the sundries.

What makes prefab metal buildings such a popular choice for businesses and homeowners? Businesses find the cost of these metal buildings to be attractive.  steel buildings offer an advantage over traditional brick-and-mortar buildings. Steel buildings are well-built, and if you opt for the vertical metal roof options. This means that metal buildings can last longer than wood structures and are 100% recyclable, which makes them Earth-friendly too.
metal storage buildings, metal garage buildings, and other custom metal buildings are often used by homeowners (residential customers) who need extra storage space. These buildings function well as storage sheds, portable garages, or workshops.

metal buildings

metal buildings for sale, metal buildings prices,steel buildings for sale,metal building kits,steel building kits

Zhongda Steel Structure , http://www.zhongdametal.com