Frequent accidents that endanger the safety of home renovation are very common

On July 6th, a collapsed building collapsed at No. 120, Cooperative Street, Dadong District, Shenyang City. The two-story balconies on the seventh floor and the sixth floor collapsed to the fifth floor. On July 26, 2015, the hand elevator in Anliang Department Store, Jingzhou City, Hubei Province, will be one. Living life engulfed; On July 27th, the chandelier on Ms. Chen’s homeroom, which lives in the top floor of the Ha’erban district in Harbin, fell off due to the roof leaking. The wall coverings at the roof had fallen off on a large area, and no detachment was observed. A layer of black hair ... ... These security incidents are alarming, all without exception remind us - the safety of housing construction, must not be taken lightly. Is your house safe? Does your home renovation comply with safety regulations?

Among the annual housing accidents, more than half of the accidents occurred in old houses. Why is this? Because after many years of use, due to natural aging, demolished and modified houses, overweight use, construction of adjacent construction sites and other factors, the structure of the house will appear old and damaged. Therefore, every day we go in and out of our homes, we should conduct inspections at regular intervals. Especially extreme weather like summer. Typhoons, thunderstorms, etc. often occur, but they must be checked. Not only can it extend the life of the house, but more importantly it can prevent the occurrence of house safety accidents.

What types of common structures do we live in?

The structure of the house is the load-bearing skeleton consisting of the foundation, columns, beams, plates, walls and other components in the house.

There are three common structural forms of residential houses:

Frame structure, constructed of reinforced concrete columns, beams, slabs.

Mixed structure, structure made of brick walls (pillars), and concrete slabs.

House Design Decoration Design Home Design Interior Design

1 2 Next> Total 2 Page
Page to page
Function assignPage() { var page = $('#page_val').val(); if (/_\d+\.html$/.test(location.href)) { location.href = location.href.replace( /_\d+\.html/, ((page == 1) && 1? '' : '_' + page) + '.html') } else if(/\/\d+\.html$/.test (location.href)) { location.href = location.href.replace(/(\d+)\.html/, ((page == 1) && 1? '$1' :'$1_' + page) + ' .html') } } $(function(){ $('#page_form').submit(function() { assignPage() return false; }) $('#page_btn').click(function(){ assignPage( ); return false; }) }) See full story

coupling magnet:


Connects motor, consists of external rotor, internal rotor and isolating cover, both inner and outer rotors are fitted with permanent magnets in a multi-pole arrangement and are moved synchronously so as to achieve non-contact power transmission . May transport volatile, flammable, explosive and toxic air or liquids without leakage.

We may design with Maximum working torque with fewer magnets, minimum sizes to lower cost while achieving a given torque.

The Coupling Magnet has a maximum operating temperature of +180 deg C with ferrite, +550 deg C with Alnico and +200 deg C with NdFeB, 350 deg C with Smco Magnet.

coupling magnet:
1.Material:steel and NdFeB,Ferrite,AlNiCo,SmCo
2.Coating:Cr,Ni,Zn & ect.
3.Max Working Temp:550Deg C


Applications:

Widely used in magnetic drive pumps, autoclaves, mixers vaccum sealing transmission machinery industries and ect.

Magnetic Motor

Magnetic Motor,Permanent Magnet Motor,Rare Earth Magnet Motor,Neodymium Magnet Motor

Honesun Industrial Co.,Limited , https://www.chinamagnetise.com