Home improvement floor heating system needs attention

Try to use marble, floor tiles or flooring together. If wood flooring is used, only composite flooring can be used, and solid wood flooring cannot be used. The thermal stability of the wooden floor is better, the water content is lower, so that the floor is not easily deformed after being heated; the size of the floor should be thin, not too thick, and should be narrow and not wide, so as to facilitate the resistance to deformation and favorable conduction; the underlayer under the floor should not be too thick. To facilitate heat exchange and conduction

1. Try to use marble, floor tiles or floor together. If wood flooring is used, only composite flooring can be used, and solid wood flooring cannot be used. The thermal stability of the wooden floor is better, the water content is lower, so that the floor is not easily deformed after being heated; the size of the floor should be thin, not too thick, and should be narrow and not wide, so as to facilitate the resistance to deformation and favorable conduction; the underlayer under the floor should not be too thick. To facilitate heat exchange and conduction. Be sure to use a floor with a small amount of harmful substances such as formaldehyde to prevent the floor from releasing more pollutants due to baking and endangering your health.

2. Try not to make large-area ornaments (such as carpets) on the floor. The furniture without legs is not placed, so as to reduce the effective heat dissipation area and the heat effect caused by the hot air flow.

3. The floor is not placed with ordinary foam and plastic products. Because these articles have poor thermal conductivity, they tend to cause heat accumulation, which is likely to generate harmful gases under the action of long-term high temperature and endanger the health of the occupants.

4. Turn on the floor heating system to slowly heat up. Do not be too hasty, it is best to raise the temperature by about 1 °C in one hour. Keep the floor clean and dry before warming up, in case the floor is cracked and twisted due to too fast heating.

5. Do not bump, hit the ground or on the ground? a into any sharp object. The floor heating pipe laid under the ground is only about 3-4cm away from the floor surface. If it is not noticed, it will easily damage the floor heating pipe.

6. The water supply temperature should not be too high. Since the floor heating system is a low-temperature radiant heating method, the water supply temperature should not exceed 60 °C, and the working pressure of the heating system should not be high. Otherwise, it will not only cause heating uncomfortable problems, but also seriously reduce the service life of the entire system. In this regard, consumers can also choose some automatic control devices, such as water temperature automatic control unit, limit the inlet water temperature does not exceed 55 ° C, if the water temperature reaches 55 ° C, the valve automatically shuts off, hot water is cut off.

7. It is best to do environmental protection acceptance after the floor is paved. Since the floor used as the floor heating system is a composite floor, there is a problem of formaldehyde emission itself, and when it is used as a geothermal floor, after heating, the release of formaldehyde is further exacerbated. Therefore, after paving the geothermal heating floor, it must be checked for environmental protection to ensure that the release of free formaldehyde meets the standard. You can't buy cheap bargains that are not environmentally friendly, or you will endless troubles!

8. Choose a professional brand and excellent performance products. Choose a professional and competent formal company, don't try to find small manufacturers and mobile vendors. The floor heating industry is known as “three-point product, seven-point installation”. Floor heating is a systematic project. From program design, product selection, construction and installation to after-sales service, professional personnel are required to design and operate. There is a problem in the link, the maintenance will be very difficult, the project is arduous and complicated, and even affect the normal use of the entire heating system, or greatly reduce the service life of the entire system, not only that, but also buried in the later use of the system The hidden danger of energy consumption and increased use cost.

Sulfate Series

Barium Sulfate,Aluminum Sulfate,Manganese Sulfate

Meikewote Trade Co., Ltd. , http://www.rubber-auxiliarys.com